Blackmagic

ATEM Talkback Converter 4K

A$3,939
ATEM Talkback Converter 4K
No items found.
Blackmagic

ATEM Talkback Converter 4K

A$4,539
A$3,939
incl. GST
VisaMasterCardAmerican ExpressApple PayGoogle PayDiscoverDiner's ClubJCBUnion Pay
Quantity:

ATEM Talkback Converter 4K handles up to 8 cameras for SDI talkback using embedded audio channels 15 and 16 as used on the Blackmagic Studio Cameras and ATEM Camera Converter. Supports 12G-SDI for all SD, HD and Ultra HD formats up to 2160p60 and provides BNC connections to each camera, and an optical fiber socket for adding an optical fiber SFP module for extending camera distances when required. Includes push to talk buttons, support for tough and common aviation headsets, loop through for more than 8 camera support, built in speaker, front panel mic input and much more.

  • Communicate with up to 8 Cameras
  • 8 x SDI I/O
  • Camera Talkback via XLR, Mini
  • Fits in 1 Standard Rack Unit
  • Supports SDI Tally Output
  • Camera Talkback
  • Upgradeable to Accept 8 x Fiber I/O

Not sure if this is the right piece of equipment for you?

Talk to one of our expert staff for free recommendations:
Call 02 8850 2223
ATEM Talkback Converter 4K

ATEM Talkback Converter 4K

Blackmagic
A$3,939

With 12G-SDI, Blackmagic Design's ATEM Talkback Converter 4K accepts high-resolution video from up to eight studio cameras or ATEM Camera Converters and allows the control room to interact with the camera operators. The 12G-SDI connections can support video with resolutions up to 4096 x 2160 at 60 fps and rout those individual signals to a switcher via SDI outputs, to a program monitor via its own SDI output, and back to the camera operator while carrying talkback audio over a single cable. Talkback audio can be captured via a microphone plugged into the XLR jack on the front, or a headset mic plugged into the appropriate jack, also on the front panel.
This unit can be upgraded to accept fiber optic connections, which carry, bi-directional 4K video, audio, and talkback for up to 28 miles without signal degradation. And because of its 1 RU size, it can easily fit into industry standard rack-mount equipment and furniture.

Optional Optical Fiber Connectors

The ATEM Talkback Converter 4K can be upgraded to use standard single mode optical fiber cable with standard LC connectors to allow you to transmit SD and HD video signals up to 28 miles away. Standard copper wire SDI cables have a limit of several hundred feet before the signal breaks up, converting the SDI signal to optical, and sending it along optical cable greatly increases the distance of your cable runs.

Talkback and Tally

The unit features a built-in speaker and mic inputs, as well as a headphone jack for when you need privacy, or the area is too loud. When connected to the ATEM Camera Converter without needing to worry about walkie talkies. Using the talkback feature, the unit uses audio channels 15 and 16 of the SDI stream for talkback communication.
Camera operators can be selected individually if desired, and communication can be controlled by a push button, or locked open. Mute and un-mute buttons on the front of the unit allow you to control who hears what.
The unit passes SDI Tally signal information back to the cameras along with any SDI Program signal from available switchers.

Precision Signal Processing

The unit features chips that use 10-bit processing, and are switchable between SD and HD, for a clean signal.
The unit features eight independent simultaneous SDI to optical and optical to SDI converters (with the optional fiber terminals), when used in conjunction with the ATEM Camera Converter the unit can also be used as four independent SDI or Fiber to HDMI converters.

Connections

SDI Program Inputs
1 x 10-bit SD/HD/Ultra HD 4K auto switching program input from switcher, including tally information with 16 channel embedded audio.
Please click here for a summary of recommended cables to use with Blackmagic 12G‑SDI products.
SDI Program Outputs
1 x 10-bit SD/HD/Ultra HD 4K auto switching program loop thru output connects to another ATEM Talkback Converter 4K.
Talkback Audio
Aviation Headsets with 0.25" TRS headset connector and 0.206" TRS microphone connector. Front mounted balanced XLR microphone connector.
Analog Audio
1 x stereo RCA monitoring output.
SDI Camera Inputs
8 x 10-bit SD/HD/Ultra HD 4K auto
switching 16 channel embedded audio.
SDI Camera Outputs
8 x 10-bit SD/HD/Ultra HD 4K auto switching 16 channel embedded audio.
SDI Outputs
8 x 10-bit SD/HD/Ultra HD 4K auto
switching 16 channel embedded audio.
Optical Fiber Video Inputs (Optional)
8 x single mode SD/HD/Ultra HD 4K auto switching camera inputs with LC connector.
Optical Fiber Video Outputs (Optional)
8 x single mode SD/HD/Ultra HD 4K auto switching camera outputs with LC connector.
Optical Fiber Audio Inputs
8 x single mode camera audio inputs with LC connector. Channels 1 and 2 are camera audio. Channels 15 and 16 are intercom audio.
Optical Fiber Audio Outputs
8 x single mode camera audio outputs with LC connector. Channels 1 and 2 are camera audio. Channels 15 and 16 are intercom audio.
Computer Interface
1 x mini-B type USB connector for firmware updates.

Standards

SD Video Standards
525i59.94 NTSC, 625i50 PAL
HD Video Standards
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
1080i50, 1080i59.94, 1080i60
2K Video Standards
2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p
2K DCI 23.98PsF, 2K DCI 24PsF, 2K DCI 25PsF
Ultra HD Video Standards
2160p23.98, 2160p24, 2160p25, 2160p29.97,
2160p30, 2160p50, 2160p59.94, 2160p60
4K Video Standards
4K DCI 23.98p, 4K DCI 24p, 4K DCI 25p,
4K DCI 29.97p, 4K DCI 30p, 4K DCI 50p, 4K DCI 60p
SDI Compliance
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M Level B, SMPTE 425M.
Audio Sampling
Television standard sample rate of 48Khz,
24-bit A/D conversion.
Video Sampling
4:2:2, 4:4:4
Color Precision
10-bit
Color Space
REC 601, REC 709.
Multiple Rate Support
SDI switches between SD, HD and Ultra HD 4K.

Software

Internal Software Upgrade
Via included updater application.

Operating Systems

Mac 10.11 El Capitan,
Mac 10.12 Sierra or later.
Windows 8.1 and 10.

Power Requirements

Power Supply
100 - 240V AC input with redundant 12 - 31V DC input.
Power Usage
60 Watts

Physical Installation

Physical Installation
1 rack unit size. Less than 6 inches deep.

Environmental Specifications

Operating temperature
0° to 40° C (32° to 104° F)
Storage temperature
-20° to 45° C (-4° to 113° F)
Relative Humidity
0% to 90% non-condensing

What's Included

ATEM Talkback Converter 4K
Welcome wallet with QR code for software download

Warranty

Product Warranty
3 Year Limited Manufacturer's Warranty.
Repair policy
Excluding connectors, cables, cooling fans, fiber optic modules, fuses and keyboards which will be free from defects in materials and workmanship for a period of 12 months from the date of purchase.

Delivery & Returns

Assurance with every online order:

  • Full online tracking
  • Friendly personalised service
  • Full manufacturer’s warranty

Shipping Areas

We deliver to most areas within mainland Australia.

Overseas Shipping

We do not offer international shipping. Sorry.

Parcel Lockers

We does not deliver to parcel lockers due to their lack of security. Please supply an address which has someone there to receive goods. Package will be left at address if unattended. You will be asked to supply an alternative address from one of our customer service team members should you supply a parcel locker location when placing your order.

Delivery Method

Goods will be shipped to you according to the delivery method selected at the checkout. In some circumstances this may change if the selected delivery method is not available at the time of despatch.

Australia Post eParcel and Toll offer a door-to-door, street-level delivery service only. They are unable to deliver products above the ground floor or enter a customers' residence. They are also unable to provide an installation or removal service.

Bulky and Oversized Items

Bulky and Oversized Items such as large TVs and Speaker Packs delivered to residential addresses may incur a surcharge. To eliminate these surcharges, please consider shipping to a business address.

General freight carriers may require assistance to help unload bulky and oversized goods to comply with their relevant Workplace Health & Safety policies.

Returns

1. Our most important task is to ensure your absolute satisfaction. We will always strive to reach that target. However, we acknowledge that mistakes are made occasionally. This paragraph covers that possibility. If you are not wholly satisfied with the Product, please tell us at the earliest opportunity:

(a) exactly what is the fault;

(b) the date, if relevant, when the fault became apparent;

(c) when and how you discovered the fault;

(d) how the fault affected your use of the goods;

2. To do this, it is essential that you follow the instructions below. These provisions apply in the event that you return goods to us because you say they are faulty:

3. You must tell us by email message to hello@tgav.au or by letter to our land address at the top of this agreement, you that you would like to return goods, specifying exactly what goods and when purchased, and giving full details of the defect or other reason for return. We will then issue a returns note. If you send goods to us without a returns note, we may not be able to identify sufficient details to enable us to attend to your complaint.

4. The goods must be returned to us as soon as any defect is discovered.

5. All endeavours must be made to ensure goods be returned:

(a) in original packaging as far as possible in their original condition;

(b) securely wrapped;

(c) with our delivery slip;

6. The cost of freight return to Tiny Giants AV will be charged to the buyer only under the following circumstances:

(a) if the buyer is returning goods due to change of mind or any other reason not pertaining to the product being faulty;

(b) if no fault is found in testing, when the buyer has claimed the product is faulty.

7. We will notify the buyer of all freight costs before charging the buyer.

8. Please note: We may request a restocking fee of up to 20% to be paid by the customer on return of goods. This is decided on a case-by-case basis and could be requested if the product was returned due to:

(a) Change of Mind

(b) Claimed faulty product, but no fault found when testing

(b) Opened and used goods

Customer Reviews