Blackmagic Design

Teranex Mini SDI to HDMI 8K

A$2,265
A$1,917
incl. GST
Close
No items found.

Advanced 8K HDMI monitoring solution for converting SDI sources to HDMI in all HD, Ultra HD and 8K formats up to 4320p60. Includes 4 HDMI 2.0 output connections, built in down converter, HDR formats, 33 point 10‑bit RGB LUTs, built in waveform, parade, vector and histogram scopes, monitor calibration and more.

  • Supports DCI 8K, 8K, DCI 4K, UHD, 2K, HD
  • Accepts Third-Party Calibration Probes
  • On-Screen Scopes
  • 12G-SDI I/O and HDMI Outputs
  • Auto-Convert 2SI and Square Division
  • Supports HDR Workflows
  • Supports 33-Point 3D LUTs
  • Front-Panel Interface

Not sure if this is the right piece of equipment for you?

Talk to one of our expert staff for free recommendations:
Call 02 8850 2223
Teranex Mini SDI to HDMI 8K

Teranex Mini SDI to HDMI 8K

Blackmagic Design
A$1,917

The Blackmagic Design Teranex Mini SDI to HDMI 8K HDR is more than just a basic converter, it is also an advanced 8K monitoring solution. The four 12G-SDI inputs support 4K signals independently and can be ganged together to support an 8K input signal, either DCI 8K or 8K video split into four UHD signals. It can use third-party calibration probes such as the SpectraCal C6, X-Rite i1 Display Pro, or the Klein K10-A probe to accurately align connected displays for precise color. The built-in LCD screen displays not only the video image, but it can also display two on-screen scopes that can be selected between WFM, Parade, Vector, and Histogram.

The 8K is available on the four SDI outputs, or via the four HDMI outputs for monitors that support quad HDMI inputs. If you are not connected to an 8K monitoring solution, a built-in down-converter enables you to display the 8K input video on an Ultra HD or HD monitor. The unit will convert between 2SI and square division automatically. The Mini SDI to HDMI 8K HDR solution supports a variety of HDR workflows, including, PQ and HLG, and it supports both Rec. 202 and Rec. 709 as well as 100% of the DCI-P3 format. Two independent 3D LUTs can be loaded at the same time, and you can switch between them from the unit's front panel. In addition to the LCD video screen, the front of the unit features a rotating selection knob and six front-panel buttons for navigating the unit.

The quad-link 12G-SDI inputs have outputs for looping to other equipment. In addition, all HD, Ultra HD, and 8K standards are supported, allowing broadcast or film industry use. With 2SI to square division conversion built-in, an 8K source will be automatically converted for the monitor. Teranex Mini SDI to HDMI even handles both Level A or B 3G-SDI plus YUV and RGB SDI formats.

The Blackmagic Design Teranex Mini SDI to HDMI 8K HDR can use third-party calibration probes (not included) such as the SpectraCal C6, X-Rite i1 Display Pro, or the Klein K10-A probe to accurately align connected displays for precise color. Just connect the probe to the unit via the USB Type-C connector on the front panel, and start the calibration process in the menu.

The front-panel LCD provides confidence monitoring with both images and accurate audio level meters. There are menus for all functions and it's easy to scroll through the menu pages to find settings that need changing. The 3D LUTs can be enabled just by pressing the 1 or 2 buttons. Calibration is also started via the menus and you simply follow the prompts to calibrate your display. The audio meters can even be switched between VU or PPM ballistics. HDMI instant lock can be enabled to ensure the HDMI display locks instantly if the input video is interrupted. There are settings for configuring scopes, their on-screen location, or opacity. You can even view and edit network settings.

Teranex Mini SDI to HDMI 8K HDR includes the same high-quality, 33-point 3D LUTs as used in the film industry. 3D LUTs are perfect for recreating the look of old-style film stocks, or they can be used to compensate for the colorimetry of the connected display. You can calibrate the connected display by connecting a third-party USB color probe, and Teranex Mini SDI to HDMI 8K HDR will analyze the monitor and generate a 3D LUT to correct for color differences between displays. Two independent 3D LUTs can be loaded and you can select between them from the front panel. Plus, 3D LUTs use standard file formats so you can load LUTs generated by software such as DaVinci Resolve.

Connections

SDI Video Inputs
4 x 12G-SDI HD/2K/4K/8K auto switching.
Dual and quad link 12G‑SDI for 8K only.
Please click here for a summary of recommended cables to use with Blackmagic 12G‑SDI products.
SDI Video Outputs
4 x 12G-SDI loop output.
HDMI Video Outputs
4 x HDMI 2.0 type A connector with support for HD, UHD and 4K in single link or 4320p60 in Quad Link.
Analog Audio Outputs
2 channels analog audio via RCA connectors.
Embedded Audio Support
16 channels of embedded audio on all SDI loop outputs and 8 channels on the HDMI outputs.
Multi Rate Support
1.5G, 3G, 6G, 12G, 2SI Dual Link 12G‑SDI, 2SI Quad Link 12G‑SDI, Square Division Quad Link 12G‑SDI.
Updates and Configuration
USB-C or Ethernet.
Reclocking
Yes

Standards

SD Video Standards
None
HD Video Standards
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
2K Video Standards
2Kp23.98 DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI, 2Kp59.94 DCI, 2Kp60 DCI
2KPsF23.98 DCI, 2KPsF24 DCI, 2KPsF25 DCI, 2KPsF29.97 DCI, 2KPsF30 DCI
Ultra HD Video Standards
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p60
4K DCI Video Standards
4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI
8K Video Standards
4320p23.98, 4320p24, 4320p25, 4320p29.97, 4320p30, 4320p47.95, 4320p48, 4320p50, 4320p59.94, 4320p60 Auto switching between 2SI and Square Division
8K DCI Video Standards
8Kp23.98 DCI, 8Kp24 DCI, 8Kp25 DCI, 8Kp29.97 DCI, 8Kp30 DCI, 8Kp47.95 DCI, 8Kp48 DCI, 8Kp50 DCI, 8Kp59.94 DCI, 8Kp60 DCI Auto switching between 2SI and Square Division
SDI Compliance
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M Level A and B, SMPTE 2081‑1, SMPTE 2081‑10, SMPTE 2082‑1 and SMPTE 2082‑10
SDI Video Rates
SDI video connections are switchable between 1.5G SDI, high definition level A and level B 3G‑SDI, 6G‑SDI and 12G‑SDI
SDI Video Sampling
4:2:2 and 4:4:4
SDI Audio Sampling
Television standard sample rate of 48 kHz and 24‑bit.
SDI Color Precision
4:2:2 and 4:4:4
SDI Color Space
YUV and RGB.

HDMI Output Standards

SD Video Standards
None
HD Video Standards
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60
Ultra HD Video Standards
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p60
8K Video Standards
4320p23.98, 4320p24, 4320p25, 4320p29.97, 4320p30, 4320p47.95, 4320p48, 4320p50, 4320p59.94, 4320p60
HDMI Color Space
REC 709, REC 2020
HDMI Color Precision
YUV 4:2:2 and RGB 4:4:4 in HD, 2K, 4K and 8K. 33 point LUTs can be loaded via Teranex Utility or calibration LUT generated from calibration probe test.

Scopes

Scopes
Waveform, RGB/YUV Parade, Vector, Histogram
Viewing Modes
Two by scopes with picture overlay with opacity control. Waveform and Parade with standard and HDR graticules.

Software

Software Control
Mac OS X™ and Windows™ software upgrade via USB‑C or Ethernet.
Internal Software Upgrade
Via included updater application.

Operating Systems

Mac 10.14 Mojave,
Mac 10.15 Catalina or later.
Windows 10, 64-bit.

Settings Control

Settings Control
6 buttons and spin knob for menu and settings control, 2.2 inch color LCD display.

Power Requirements

Power Supply
1 x built in international AC power supply with IEC C14 inlet. IEC Power cable required. 100 - 240V AC Input.
Power Consumption
25 Watts
Operational Voltage Range
100 - 240V AC

Physical Specifications

Environmental Specifications

Operating Temperature
0° to 40°C (32° to 104°F)
Storage Temperature
-20° to 60°C (-4° to 140°F)
Relative Humidity
0% to 90% non‑condensing

What's Included

Teranex Mini SDI to HDMI 8K HDR
Welcome wallet with QR code for software download

Warranty

1 year Limited Manufacturer’s Warranty.

Delivery & Returns

Assurance with every online order:

  • Full online tracking
  • Friendly personalised service
  • Full manufacturer’s warranty

Shipping Areas

We deliver to most areas within mainland Australia. If your postcode or address does not provide shipping estimates, please contact our Customer Service Team to discuss delivery options.

Overseas Shipping

We do not offer international shipping. Sorry.

Parcel Lockers

We does not deliver to parcel lockers due to their lack of security. Please supply an address which has someone there to receive goods. Package will be left at address if unattended. You will be asked to supply an alternative address from one of our customer service team members should you supply a parcel locker location when placing your order.

Delivery Method

Goods will be shipped to you according to the delivery method selected at the checkout. In some circumstances this may change if the selected delivery method is not available at the time of despatch.

Australia Post eParcel and Toll offer a door-to-door, street-level delivery service only. They are unable to deliver products above the ground floor or enter a customers' residence. They are also unable to provide an installation or removal service.

Bulky and Oversized Items

Bulky and Oversized Items such as large TVs and Speaker Packs delivered to residential addresses may incur a surcharge. To eliminate these surcharges, please consider shipping to a business address.

General freight carriers may require assistance to help unload bulky and oversized goods to comply with their relevant Workplace Health & Safety policies.

Returns

1. Our most important task is to ensure your absolute satisfaction. We will always strive to reach that target. However, we acknowledge that mistakes are made occasionally. This paragraph covers that possibility. If you are not wholly satisfied with the Product, please tell us at the earliest opportunity:

(a) exactly what is the fault;

(b) the date, if relevant, when the fault became apparent;

(c) when and how you discovered the fault;

(d) how the fault affected your use of the goods;

2. To do this, it is essential that you follow the instructions below. These provisions apply in the event that you return goods to us because you say they are faulty:

3. You must tell us by email message to hello@tgav.au or by letter to our land address at the top of this agreement, you that you would like to return goods, specifying exactly what goods and when purchased, and giving full details of the defect or other reason for return. We will then issue a returns note. If you send goods to us without a returns note, we may not be able to identify sufficient details to enable us to attend to your complaint.

4. The goods must be returned to us as soon as any defect is discovered.

5. All endeavours must be made to ensure goods be returned:

(a) in original packaging as far as possible in their original condition;

(b) securely wrapped;

(c) with our delivery slip;

6. The cost of freight return to Tiny Giants AV will be charged to the buyer only under the following circumstances:

(a) if the buyer is returning goods due to change of mind or any other reason not pertaining to the product being faulty;

(b) if no fault is found in testing, when the buyer has claimed the product is faulty.

7. We will notify the buyer of all freight costs before charging the buyer.

8. Please note: We may request a restocking fee of up to 20% to be paid by the customer on return of goods. This is decided on a case-by-case basis and could be requested if the product was returned due to:

(a) Change of Mind

(b) Claimed faulty product, but no fault found when testing

(b) Opened and used goods